Matek Systems ELRS-R24-P6 R24-P6 ExpressLRS 2.4GHz PWM Receiver With Antenna Support 2~8S VBat Voltage Sense For FPV RC Racing Drone

LOCKPICKWEBSKU: Matek Systems

Price:
$18.99

Tax included Shipping calculated at checkout

Stock:
In stock

Description

Description:

Brand: Matek Systems

Model: ELRS-R24-P6

Item: PWM Receiver

ESP8285, SX1281

Antenna connector: IPEX MHF 1

6x PWM outputs

Support 2~8S VBat voltage sense

RF Frequency: 2.4GHz (2400~2480MHz)

Telemetry power: 12dbm

Receiver output protocol: PWM

Input voltage: 4~9V DC @ “+” pad

Voltage sense: 34V Max. @ “VBat” pad

Power dissipation:  45mA(binding), 85mA(wifi mode)

PCB size: 20mm x 18mm

Weight: 2g w/ antenna

 

Firmwares

* ExpressLRS 3.0 or newer, DIY 2.4GHz / DIY 2400 RX PWMP EX.

* ExpressLRS wiki for PWM receiver, Click HERE

* Make sure Receiver and TX module both are running ExpressLRS 3.0 or newer.

——————————————————-

* Receiver has ExpressLRS 3.0 preloaded with binding phrase '123456',  the Receiver will never enter binding mode if using the traditional binding procedure.

* You need to reflash it with your binding phrase OR go into WebUI to set your binding phrase.

 

Flashing via Wifi

* Disconnect ESC and servos from receiver first.

* Power on receiver by 5V source. Receiver's LED(Red) will blink slow at first, and after 20s, it should blink fast indicating it's on Wifi Hotspot Mode.

* More detailed steps,  pls refer this page.

* Target: DIY 2.4 GHz / DIY 2400 RX PWMP EX.

 

Flashing via UART

* Disconnect ESC and servos from receiver first.

* Wire the receiver into the USB-TTL adapter, with TX on receiver connected to the Rx on the USB-TTL, and RX on receiver connected to the Tx of the USB-TTL. Wire 5V and GND of the USB-TTL to 5V and GND of the Receiver.

* Press the boot button while powering on the receiver, then release – the Red LED on receiver should now be solid.

* Select the target DIY 2.4 GHz / DIY 2400 RX PWMP EX  and  “UART” for Flashing Method,  set your bind phrase and Firmware Options and once done, click on Build and Flash.

 

Package Included:

1x Matek Systems ELRS-R24-P6 Receiver

1x IPEX MHF1 Antennas. 15cm

Dupont 2.54 pins  (Board is shipped unsoldered)

 

Payment & Security

PayPal

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Estimate shipping

You may also like

Recently viewed