Description
Features:
Specifications:
|
Connector type :
|
2 channels with BNC sockets, 20 mm spacing. |
|
|
Vertical resolution: |
8 Bit ~ 13 Bit . |
|
|
Maximum sampling rate (S/s): |
250M (real time), 1G (equivalent) |
|
|
Bandwidth ( −3 dB): |
100MHz |
|
|
Input coupling: |
AC/DC. |
|
|
Input characteristics: |
1MΩ || 25pF. |
|
|
PC OS requirements: |
Windows XP, Win 7, Win 8.1, Win10 (32 bit and 64 bit). |
|
|
Over-voltage protection: |
±60.0v (x1), ±600.0v (x10). (DC + AC peak) |
|
|
Triggering type: |
Rising/falling edge according to trigger level, Pulse width trigger. |
|
|
Triggering mode: |
None, auto, normal, single. |
|
|
Pre-trigger capture: |
1%~99% of capture size. |
|
|
Automatic measurements: |
Maximum, minimum, average, RMS, frequency, period, positive pulse width, negative pulse width, duty cycle, rise time, peak-to-peak value. |
|
|
Frequency response mapping |
Scanning the frequency, record the process frequency and magnification data, and draw the frequency response curve. |
|
|
Measurement statistical curve: |
The historical trend of the automatically measured quantities can be plotted for statistics and analysis. |
|
|
Pass / Fail detection: |
You can set the upper and lower limits of the measurement quantity, and perform Pass / Fail detection and fault alarm function on the measured signal. |
|
|
Deep measurement: |
With this function, the waveform jump points are automatically numbered and marked, and the time difference between the two adjacent numbers is automatically displayed. |
|
|
Samples Interpolation: |
Linear or sin(x)/x. |
|
|
FFT: |
1024 ~ 16K points. |
|
|
FFT window function: |
Rectangle, Hanning, Hamming, Blackman. |
|
|
Math: |
A+B, A-B, AxB, X-Y. |
|
|
Acquisition Modes: |
Normal mode / High Resolution mode / Peak detect mode. |
|
|
Waveform recording and playback: |
File format : |
*.oscxxx. |
|
Record depth: |
50 ~ 450 frames. |
|
|
File size: |
6 MB ~ 20GB. |
|
|
Save as file: |
txt, csv, excel, oscxxx, jpg. |
|
|
Comparison reference:
|
Support waveform image import and real-time waveform comparison reference. It can import waveform pictures, set gray level and transparency, move up and down, and zoom in and out horizontally and longitudinally. |
|
|
Data logger Sampling Interval: |
1 second to 1 hour. |
|
|
Data logger Record Duration: |
1 minute ~ 72 hours. |
|
|
Temperature range: |
Operating: 0 °C to 40 °C (20 °C to 30 °C for stated accuracy). Storage: −20 °C to +60 °C. |
|
|
Reference Output: |
1K Hz, 1.5 V square wave output with 50% duty cycle. Software-configurable PWM output with adjustable frequency and duty cycle. |
|
|
Size: |
153(L) x 93(W) x 23(H) mm. |
|
|
Languages (full support): |
English, Chinese (simplified). |
|
|
Compliance: |
CE, FCC. |
|
|
Net weight: |
210 g. |
||
|
Input sensitivity (10 vertical divisions): |
20 mV/div to 2 V/div. |
||
|
Input ranges( probe x1): |
±100 mV to ±5 V full scale, in 7 ranges. |
||
|
Timebase selection (10 horizontal divisions): |
5 ns/div ~ 60 s/div, in 32 ranges. |
||
|
Typical noise (peak to peak voltage):
|
20 mV/div |
2 mV |
|
|
50 mV/div |
5.8 mV |
||
|
100 mV/div |
8 mV |
||
|
200 mV/div |
22 mV |
||
|
500 mV/div |
38.8 mV |
||
|
1 V/div |
88.2 mV |
||
|
Memory depth
(byte /Ch):
|
64K |
≤50 ms/div |
|
|
258K |
200 ms/div |
||
|
645K |
500 ms/div |
||
|
2M |
1 s/div |
||
|
8M |
2 s/div |
||
|
10M |
10 s/div |
||
|
20M |
20 s/div |
||
|
30M |
30 s/div |
||
|
40M |
40 s/div |
||
|
50M |
50 s/div |
||
|
60M |
60 s/div |
||
|
Trigger type: |
Hardware |
||
|
Trigger source: |
Channel A |
||
|
Power consumption: |
5 v || (248~279) mA
|
||
|
Protocols decoding: |
UART/RS-232/485/422, I²C,CAN,SPI
|
||
|
FIR Filtering: |
Band-pass, Band-stop |
||
|
Custom probes |
Support two-point calibration of any current clamp on the market. |
||
|
Model: |
OSCH02H |
|
Detail: |
OSCH02F+ Isolated differential input model. |
|
Input channels: |
2 |
|
Maximum sampling rate (S/s): |
1G |
|
Bandwidth (−3 dB): |
100MHz |
|
FFT: |
√ |
|
Data logger: |
√ |
|
I/O extension: |
√ |
|
Serial bus decoding: |
√ |
|
Hardware trigger: |
√ |
|
Pulse width triggersupport: |
√ |
|
Signal generator module support: |
√ |
|
Logic analyzer module : |
√ |
|
Android Phone/ Tablet support |
√ |
|
Isolated differential input model |
√ |
|
Custom probes |
√ |
|
Frequency response mapping |
√ |
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Security
