Description
Manual:
ELRS Version ; Frsky Version ; PNP Version
Features:
X12 5-IN-1 AIO flight controller built-in 2.4G ELRS V2.0 and OPENVTX
VTX Power up to 400mw
Support ELRS V3.0 (Need to upgrade firmware)
Powerful EX1103 KV11000 motors
CaddxFPV Ant FPV camera
Recommend battery (Not include):
Battery tray size: Maximum support for batteries with a width of approximately 17mm and a height of approximately 13mm
Specifications:
Brand Name: Happymodel
Item Name: Bassline 2S 2inch Micro FPV toothpick drone Wheelbase: 90mm Size: 115mm*115mm*40mm
Analog version Weight: 40gram
Optional Receiver version:
2.4G ELRS SPI / SPI Frsky D8/D16 / SPI Flysky / PNP (without onboard receiver)
Spare parts specifications:
Motor |
Mode: EX1103 KV11000 |
Propellers |
Weight:0.88g Material: PC Pitch:2.3inch Props Dia:52.17mm Center Thickness:5mm Center Hole Dia:1.5mm |
Flight controller |
X12 ELRS V2.1 flight controller built-in ELRS 2.4G receiver Target: CRAZYBEEF4SX1280 X12 Frsky V2.1 flight controller built-in SPI Frsky 2.4G receiver Target: CRAZYBEEF4FR X12 Flysky V1.0 flight controller built-in SPI Flysky 2.4G receiver Target: CRAZYBEEF4FS X12 PNP V1.1 flight controller without onboard receiver Target: CRAZYBEEF4DX MCU:STM32F411CEU6 (100MHZ, 512K FLASH) Built-in Betaflight OSD(SPI Control) Built-in current sensor |
Onboard 4in1 ESC |
Power supply: 1-2S LiPo/LiPo HV Current: 12A continuous peak 15A (3 seconds) Support Bluejay firmware |
Onboard SPI ExpressLRS 2.4GHz Receiver |
Packet Rate option: 50Hz/150Hz/250Hz/500Hz ExpressLRS Firmware version: V2.0 Antenna : SMD antenna Receiver protocol: SPI ExpressLRS Compatible with ExpressLRS V2.0 TX Module Couldn’t flash separately ExpressLRS firmware Could flash FC firmware to support ExpressLRS v3.0 TX module |
Onboard SPI Frsky D8/D16 receiver Version |
SPI BUS receiver Frsky D8/D16 compatible Compatible Non EU transmitter D8/D16 model Channels: 8ch/16ch No ground interference ( Transmitter and receiver 1 m from the ground): 200meter Failsafe support |
Onboard SPI Flysky receiver Version |
SPI BUS receiver Protocol: AFHDS-2A Channels: 14ch(AFHDS-2A) No ground interference ( Transmitter and receiver 1 m from the ground): 200meter Failsafe support |
PNP Version (without onboard receiver) |
Full UART1 for external Receiver Support CRSF/GHOST/SBUS/IBUS/DSMX protocol IR1 pad(invert RX1) used for SBUS input |
Onboard 5.8g OPENVTX |
Firmware version: OPENVTX Smartaudio v2.1 PIT Mode support RCE Mode support Channels:48ch Transmitting Power: 0/RCE/25mw/100mw/400mw Power supply: DC 5V Current (5v): <650ma (400mw) |
Caddx ANT 1200tvl camera |
Image Sensor: 1/3" CMOS Sensor Horizontal Resolution: 1200 TVL TV System: NTSC or PAL IMAGE: 16:9 or 4:3 Synchronization: Internal Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000 S/N Ratio : >52dB (AGC OFF) Video Output: CVBS Lens: 1.8mm Min. Illumination: 0.001Lux@F1.2 Auto Gain Control: YES WDR: Global WDR DNR: 3D DNR Dimensions: 14*14mm(with bracket to 19*19mm) Wide Power Input: DC 3.7-18V Weight: 2g (N.W.) |
Package Included:
Item Name |
Qty |
Bassline 2inch frame and canopy |
1 |
Option1: X12 ELRS V2.1 flight controller built-in SPI ELRS 2.4G receiver |
1 |
Option2: X12 Frsky V2.1 flight controller built-in SPI Frsky 2.4G receiver |
|
Option3: X12 Flysky V1.0 flight controller built-in SPI Flysky 2.4G receiver |
|
Option4: X12 PNP V1.1 flight controller without onboard receiver |
|
EX1103 KV11000 brushless motor |
4 |
Gemfan toothpick 2023 tri-blade propellers(4cw+4ccw) |
1 |
Caddx ANT 1200TVL Camera |
1 |
Onboard 5.8G Openvtx 0mw~400mw VTX |
1 |
Canopy for 14mmx14mm camera |
1 |
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Security