Happymodel Crux35 ELRS V2 Analog / Crux35 Digital HD 150mm 3.5 Inch 4S Ultralight FPV Racing Drone BNF w/ Runcam Link Wasp Nano / ANT 1200tvl Camera

SKU: Happymodel Crux35-Analog-ELRS 2.4GHz-01

Version: Analog
Receiver: ELRS 2.4GHz
Price:
$159.99

Tax included Shipping calculated at checkout

Stock:
In stock

Description

Features:

Ultra-lightweight 3.5-inch BNF FPV Freestyle Drone

HD video transmission and analog video transmission are optional

Integrated ExpressLRS SPI receiver or Frsky SPI D8/D16 receiver

High efficiency EX1404 power system

Can be equipped with Naked Gopro or SMO4K

Support 3-4S battery 4S 750mah battery is recommended, maximum support 4S 1100mah

 

Specifications: ( Manual of ELRS Version / Frsky Version)

Brand: Happymodel

Model: Crux35 Analog / Crux35 HD

Wheelbase: 150mm

Weight: 87g ( Analog); 108g ( HD)

Size: 130mmx130mmx45mm(without propellers)

Version Optional: Analog / HD

Receiver optional: UART ExpressLRS 2.4GHz (ELRS 2.4G RX) /  SPI Frsky D8/D16 (S-FHSS compatible)

Camera option: HD version Nebula+Vista

Analog version Ant+OVX303 VTX

Flying time: 9min~15min 4s 750mah battery

 

Motor

Mode: EX1404
KV options: KV3500
Configu-ration:9N12P
Stator Diamter:14mm
Stator Length:4mm
Shaft Diameter: Φ1.5mm
Motor Dimension(Dia.*Len):Φ15mm*15mm
Weight:9g

Propellers

Propeller Diameter: 3.5 inch       
Pitch : 2              
Blades : 3
Material : Poly Carbonate        
Weight : 1.5g
Hub Diameter : 10mm           
Hub Thickness:4.7mm           
Shaft :1.9/1.5/1.9mm
Adaptor Rings : NO

Flight controller

(ELRS Version)

MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor: ICM42688P or BMI270 (SPI Control)
Mount pattern: 25.5×25.5 M2
Size:32*32*5mm
Power supply: 2-4S Lipo battery
Built-in 20A Blheli_s ESC each
Built-in Betaflight OSD(SPI Control)
Built-in UART ExpressLRS 2.4GHz receiver
Built-in 5V 1.5A BEC
Flight controller firmware target: CRAZYBEEF4DX

Flight controller

(Frsky version)

Model: CrazybeeF411 FRSKY

MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor: BMI270 or ICM42688P(SPI connection)
Board size: 28.5 * 28.5MM
Power supply: 2-4S battery input (DC 8V-17V)
Built-in 20A(each) Blheli_S 4in1 ESC Dshot600 ready
Built-in Frsky D8/D16 SPI receiverBuilt-in 2.4G Power Amplification
Built-in Betaflight OSD(SPI Control)
Built-in Current meter
Built-in 5V 1.5A BEC
Built-in voltage detectionFirmware target: MATEKF411RX

Onboard 4in1 ESC

MCU upgraded to EFM8BB21
Power supply: 1S LiPo/LiPo HV

Current: 5A continuous peak 6A (3 seconds)
Support BLHeliSuite programmable
Factory firmware: O_H_5_REV16_8.HEX
Default protocol: DSHOT300

Onboard UART ExpressLRS 2.4GHz Receiver

(ELRS 2.4G Receiver version)

Packet Rate option: 25Hz/50Hz/150Hz/250Hz/500Hz
RF Frequency: 2.4GHzAntenna plug: IPEX
Telemetry output Power: <12dBm
Receiver protocol:  CRSF
Default firmware version: ExpressLRS V3.0.1

Onboard SPI Frsky 2.4GHz receiver ( SPI Frsky Receiver Version)

SPI BUS receiver
Frsky D8/D16/EU-LBT/, Futaba S-FHSS switchable on Betaflight  
Channels: 8ch/16ch

Dual antenna
Failsafe support
No ground interference ( Transmitter and receiver 1 m from the ground): 400m

Runcam Link Wasp Nano

(Digital HD version)

Runcam Link Wasp Nano

Caddx ANT 1200tvl camera

(Analog version)

Image Sensor: 1/3" CMOS Sensor

Horizontal Resolution: 1200 TVL

TV System: NTSC or PAL 

IMAGE: 16:9 or 4:3

Synchronization: Internal

Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000

S/N Ratio : >52dB (AGC OFF)

Video Output: CVBS

Lens: 1.8mm

Min. Illumination: 0.001Lux@F1.2

Auto Gain Control: YES

BLC: YES

WDR: Global WDR

DNR: 3D DNR

Dimensions: 14*14mm(with bracket to 19*19mm)

Wide Power Input: DC 3.7-18V

Work Temperature: -20℃~+60℃

Weight: 2g (N.W.)

OVX303 5.8Ghz VTX

(Analog version)

Model: OVX303

Frequency: 5.8G 40CH

Transmitting Power: 0/RCE/25mw/100mw/300mw

Power supply: DC 5V

Current (5v): <650ma (300mw)

Weight: 1.5gram without antenna

Antenna: RHCP

 

Recommended(Not Included):

4S: 750mah Battery

 

Package Included:(Optional)

Analog

1x Crux35 Frame

1x Analog FPV Camera Caddx Ant

1x Happymodel OVX303 5.8G analog VTX

4x Happymodel EX1404 KV3500 brushless motor

1x HQProp T3.5X2X3Grey (4cw+4ccw)

1x Screw Driver

1x Buckle for battery

Option1: CrazyF411 ELRS FC with UART ELRS

 

Option2: CrazyF411 FRSKY FC SPI Frsky

 

HD

1x Crux35 Frame

1x CaddxFPV Digital HD  Kit

4x Happymodel EX1404 KV3500 brushless motor

1x HQProp T3.5X2X3Grey (4cw+4ccw)

1x Screw Driver

1x Buckle for battery

Option1: CrazyF411 ELRS FC with UART ELRS

 

Option2: CrazyF411 FRSKY FC SPI Frsky

 

Payment & Security

Payment methods

PayPal

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.


Security

Estimate shipping

You may also like

Recently viewed