Happymodel Moblite7 HDZero 1S 75mm F4 Whoop FPV Racing Drone BNF with HDZero Whoop Lite VTX HDZero Lite Camera

SKU: Happymodel Moblite7-2.4GHz ELRS SPI-01

Receiver: 2.4GHz ELRS SPI
Price:
$232.99

Tax included Shipping calculated at checkout

Stock:
In stock

Description

Specification:

Brand Name: Happymodel
Model: Moblite7 HDZERO 
Frame wheelbase: 75mm
Weight: 29.5 gram without battery
Size: 98mm*98mm*50mm
Receiver optional: SPI ELRS 2.4GHz / SPI Frsky Receiver
Compatible with 1S Lipo battery or Lihv battery PH2.0 Plug ( Not Included)

SuperbeeF4 Lite Flight Controller SPI ELRS version Firmware target: CrazybeeF4SX1280
SPI FRSKY version Firmware target: CrazybeeF4FR
MCU:STM32F411CEU6 (100MHz, 512K FLASH)
Sensor: MPU-6000 or ICM20689 or BMI270(SPI connection)
Power supply: 1S Lipo Lihv battery input (DC 2.8V~4.35V)
Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
Built-in Betaflight OSD(SPI Control)
Built-in SPI Frsky/ExpressLRS receiver
Built-in 5V 1A BEC
Built-in voltage detection
Onboard 4IN1 ESC

MCU upgraded to EFM8BB21
Power supply: 1S LiPo/LiPo HV (2.8v~4.35v)

Currents: 5A continuous peak 6A (5 seconds)
Support BLHeliSuite programmable
Factory firmware: O_H_5_REV16_8.HEX
Default protocol: DSHOT150/DSHOT300/DSHOT600

Onboard SPI ExpressLRS 2.4GHz Receiver

( SPI ELRS Version)

 

Packet Rate option: 25Hz/50Hz/150Hz/250Hz/500Hz
RF Frequency: 2.4GHz
Telemetry output Power: <12dBm
Receiver protocol:  SPI ExpressLRS
Could bind with ELRS V2.0 firmware TX module

Onboard Frsky SPI D8 /D16 2.4GHz Receiver

( Compatible Frsky Receiver Version)

SPI BUS receiver Frsky D8/D16 compatible
Compatible Non EU transmitter D8 model and EU-LBT(Frsky_x_lbt)
Channels: 8ch or 16ch
Failsafe support
No ground interference ( Transmitter and receiver 1 m from the ground): 100m~200m
Based on CC2500 RF module Compatible with Futaba S-FHSS, Redpine protocol 
EX1002 20000KV Motor Configu-ration:9N12P
Stator Diameter:10mm
Stator Length:2mm
Shaft Diameter:Φ1.5mm
Motor Dimension(Dia.*Len):Φ13.5mm*12.5mm
Weight(g): 2.5g
No.of Cells(Lipo):1S only
Gemfan 1610-2 Blades Propeller Weight:0.24g
Material: PC
Pitch:1 inch
Props Dia:40mm
Center Hole Dia:1.5mm
HDZero Whoop Lite VTX 1S Input
25mW/200mW RF Output-SmartAudio Support
25.5x25.5 M2 Soft Mounting- Antenna Retention
Removable Shielding Box- 32.5x32.5mm(29x29mm inner)
4.5grams/4mm Thickness (without shielding)
HDZero Nano Lite Camera 14x16x11 mm
1.5gram
0.5 inch, up to 10650 mV/Lux-sec ultra-high sensitive CMos sensor
Excellent low light performance
Fov:
4:3: D:130° H:108° v:84°
16:9:D:122° H:108° V:65°

 

Package Included:

1x Mobula7 v4 75mm frame +Canopy

1x Optional Receiver

4x EX1002 KV20000 Unibell brushless motor

4x Gemfan 1610-2 Blades Propeller CW

4x Gemfan 1610-2 Blades Propeller CCW

1x HDZero Whoop Lite VTX

1x HDZero Nano Lite Camera

1x Spare Canopy

1x Propeller disassemble tool

1x Screw driver

 

Payment & Security

Payment methods

PayPal

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.


Security

Estimate shipping

You may also like

Recently viewed